Using iSCSI On Fedora 10 (Initiator And Target)
|
|
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Fedora 10. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
|
|
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Fedora 10. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
http://www.howtoforge.com/using-iscsi-on-fedora-10-initiator-and-target Full Story |
This topic does not have any threads posted yet!
You cannot post until you login.
